Maintenance and operation of electric hoist

Okt 25, 2024

As an important lifting equipment, electric hoist has been widely used in industrial production, logistics transportation, building construction and other fields.

Daily maintenance and maintenance

1. Check and lubricate regularly

The daily maintenance of the electric hoist mainly includes regular inspection and lubrication. Specific operations are as follows:

Check the wear of wire rope and chain: wire rope and chain is an important part of the electric hoist, it is necessary to check its wear regularly, and it should be replaced in time when it is found that there are broken wires or obvious wear.
Lubricating transmission parts: the transmission mechanism of the electric hoist (such as gears, bearings, etc.) should be regularly added with lubricating oil to maintain a good lubrication state to reduce wear and extend the service life of the equipment.
Check the electrical system: check the wiring, switch and motor operation of the electrical control system regularly to ensure that the electrical part works normally to avoid shutdown or equipment damage caused by electrical failure.

2. Cleaning and anti-corrosion

Cleaning and anti-corrosion is an important part of the daily maintenance of electric hoist. The electric hoist should be cleaned regularly, especially for equipment with poor working environment (such as places with high humidity and more dust). The following points should be noted when cleaning:

Prevent dust and debris from entering the motor: dust and debris are easy to cause poor heat dissipation of the motor, thus accelerating the aging of the motor.
Use anti-rust oil for surface protection: For parts prone to rust, you can apply anti-rust oil regularly to avoid damage caused by corrosion.

Operation specifications and precautions

1. Correct operation method

The operation method of the electric hoist directly affects the service life of the equipment. The following are the specifications to be observed when operating electric hoists:

Avoid overload: overload is one of the main causes of damage to electric hoist. During operation, the equipment must be operated in strict accordance with the rated load of the equipment to avoid excessive wear or fracture caused by overload.
Slow start and stop: when starting and stopping the electric hoist, try to avoid rapid operation to reduce the impact on the transmission parts of the equipment and extend its service life.
Avoid impact load: When lifting heavy objects, it should be avoided that the heavy objects suddenly stop or drop sharply in the air, otherwise it is easy to damage the transmission parts of the electric hoist.

2. Operator training

The professional quality and operating skills of the operator have a direct impact on the service life of the electric hoist. Therefore, operators should receive professional training and hold relevant operation certificates. The training should include:

The structure and working principle of the electric hoist: understanding the components and working principle of the electric hoist helps the operator pay attention to the maintenance of the equipment in daily use.
Common fault identification and treatment methods: master the common faults of electric hoist and their treatment methods, you can take timely measures when the equipment fails to reduce the degree of damage.
Operating specifications and safety requirements of the equipment: Following the operating specifications and safety requirements of the electric hoist is an important guarantee to avoid accidents.

Hebei Jindiao Lifting Machinery Co, Ltd. befindet sich im Bezirk Qingyuan in der Stadt Baoding in der Provinz Hebei, der Heimatstadt des leichten Hebens in China. Es ist ein umfassendes Unternehmen, das Forschung und Entwicklung, Herstellung, Import- und Exporthandel und Online-Verkauf integriert. Das Unternehmen ist spezialisiert auf die Herstellung von hydraulischen Gabelhubwagen, Handkettenzügen, Hebelkettenzügen, elektrischen Hebezeugen, elektrischen Winden, Magnethebern, Hebegurten, Hebegurten, hydraulischen Staplern und anderen Hebeprodukten sowie auf Design, Forschung und Entwicklung und die Herstellung von nicht-standardisierten Hebezeugen nach Kundenwunsch.

Unsere Fabrik verfügt über fortschrittliche Produktionsanlagen, perfekte Erkennung Technologie, im Laufe der Jahre zu einer qualitativ hochwertigen, hohen Niveau, hoch qualifizierte Produktions-Team und Management-Team.
Unser Unternehmen mit zuverlässiger Qualität, hohe Sicherheit, Qualität After-Sales-Service unter den Straßen-und Brückenbau, Automobilbau, Schiffbau, Stahl, Bergbau, Häfen und viele andere Bereiche, in den Provinzen und Städten im ganzen Land haben Händler, Partner im ganzen Land. Derzeit werden die Produkte nach Europa, ASEAN, Amerika, Australien und in andere Dutzende von Ländern exportiert. Die Produkte des Unternehmens haben das Qualitätsmanagementsystem ISO9001:2008, die CE-Zertifizierung und die TUV-Zertifizierung erhalten.

Das Unternehmen hält sich stets an die Geschäftsphilosophie "ehrlich und vertrauenswürdig, Qualität an erster Stelle, synchronisiert mit der Welt und win-win mit den Kunden", um den Kunden einen professionellen und schnellen Pre-Sales- und After-Sales-Service zu bieten, um eine langfristige Zusammenarbeit zu gewährleisten, um die Interessen der Kunden zu sichern.
Jindiao Lifting Machinery herzlich willkommen in- und ausländische Freunde zu besuchen, Win-Win-Zusammenarbeit, suchen gemeinsame Entwicklung, zu schaffen brillant.